|
Midwest Industries
Click below to go to section
Optic mounts
Forearms Mounts
Flip Rear Sight
Light Mounts
Sling Adaptors
Forearms
__________________________________________________
OPTIC MOUNTS
 MCTAR-15 (Cantilever Aimpoint Ring) $170.00
 MCTAR-16 (Standard Aimpoint Ring) $129.00
__________________________________________________
SLING ADAPTORS
 MCTAR-06 Rail mounted sling loop $30.00
MCTAR-06 (Sling Adaptor)
Features:
 Quality materials 6061 aluminum mil-spec hard coat anodizing.
 Different configurations allow the end user to choose which adaptor fits their application. Swivel, stud, or quick detach. (rear mounts are quick detach only)
Excellent quality at an affordable price
_____________________________________________
 MCTAR-07 Rail mounted sling adaptor with stud $20.00
Quality materials 6061 aluminum mil-spec hard coat anodizing.
Different configurations allow the end user to choose which adaptor fits their application.
_____________________________________________
MCTAR-08 (QD Front Sling Adaptor For Rails) $30.00
Features:
 Quality materials 6061 aluminum mil-spec hard coat anodizing.
 Quick detachable sling swivel
_____________________________________________
MCTAR-09 (QD 4 Position Rear Sling Adaptor) $36.00
Features:
 Quality materials 6061 aluminum mil-spec hard coat anodizing.
 Quick detachable sling swivel.
_____________________________________________
 MCTAR-10 ( 6 Position Rear Sling Adaptor) $36.00
Features:
 Quality materials 6061 aluminum mil-spec hard coat anodizing.
Quick detachable sling swivel.
_____________________________________________
 MCTAR-13 (End Plate Adapter - Loop) $35.00
 MCTAR-14 (End Plate Adapter - Slot) $35.00
Features:
 Ease of installation. Simply pull down on the adjustment lever of either a four or six position stock until the pin is disengaged enough to slide the whole plastic portion of the stock completely off to the rear, then slide on the adapter tighten one screw and install the stock in the reverse order and your done in about two minutes.
 No removal of the buffer tube or the need for any special tools
 Constructed of high quality 6061 aluminum hard coat anodized for a long life of service
 Each adaptor is ambidextrous for right or left hand operation.
 Two configurations, a loop for claw type clasp or a slot for a conventional web sling
 These adaptors work very well in all types of sling configurations single point, two point or three point tactical slings
 High quality at a affordable price
_____________________________________________
LIGHT MOUNTS
MCTAR-15-04 (MX-Series Tactical Light Mount)
For the Streamlight M3 and M6 series lights $30.00
Features:
 Ease of installation (one screw in less than one minute).
 Due to the taper angle cuts the mount will not move, once tightened down.
 Can be used for right or left hand shooters.
 The mount will fit any AR-series rifle, with a standard front sight.
 This mount is designed to be used with Streamlite M-series lights, or for the X-200 surefire weapons, lights, and other brand name lights with the same mounting features. This mount will also accept a standard weaver ring.
 Constructed of 6061 aluminum, and hard coat anodized for a lifetime of service.
_____________________________________________
LIGHT MOUNTS
 Front sight rail $30.00 MCTAR-15-01
MCTAR-15-01 (Tactical Light Mount)
|
Ease of installation (one screw in less than one minute)
Extremely rigid and will not move once tightened due to the taper and angled cuts.
Can be used for right or left hand shooters.
The mount will fit any AR- series rifle, with a standard front sight.
Can use 2 one inch rings instead of one, for maximum rigidity of flashlights or lasers.
_____________________________________________
FOREARM MOUNTS
 Long accessory rail MCTAR-03 $20.00
Built from aircraft grade aluminum, fits under handguards comes with two sets of bolt both long
and short to fit old and new handguards, comes with Allen wrench. 4 1/4" long this has a weaver
measurement to the rail, most forward pistol grips fit well.
 Short accessory rail MCTAR-02 $15.00
Will fit any AR-series hand guards with large or small holes. In most circumstances you will
be able to use your standard heat shields after installation. Constructed of 6061 aluminum.
Hard coat anodized.
_____________________________________________
 The MCT M3 and M6 handguard adaptor $15.00
MCTAR-05 (Forearm Rail MX-series)
This allows the Insight Streamlight units to be mounted to a standard AR15 handguard
(down through vent holes) (Mount has single locking point) Hardcoat anodized and made from Aluminum (not the cheap plastic)
Features:
 Will fit any AR-series hand guard s with large or small holes.
 In most circumstances you will be able to use your standard heat shields after installation.
 Constructed of 6061 aluminum, hard coat anodized.
 This mount had the same mount features as the MX-tactical light mount with a very affordable price.
_____________________________________________
Flip Rear Sight $94.00 MCT-ERS
Down Position Up Position
_____________________________________________
Modular forearms MCTAR-11 (Modular Forearm Short Length) $220.00
Modular Forearm
Features:
 Ease of installation (No barrel removal or front sight removal)no gun smith required for installation.
 Modular design, eight sides and many combinations of rail positions make this the most versatile forearm on the market.
 Grenade launcher or gas launcher compatible.
 Each unit comes complete with a versatile high quality panel kit.
 Constructed of 6061 billet aluminum mil-spec hard coat anodizing for a lifetime of service.
 All rails are picatinny spec for compatibility with current high quality accessories.
|
_____________________________________________
2 Piece Forearm $130.00
 MCTAR-17 (2 Piece Carbine Length)
 MCTAR-17C (2 Piece Carbine Length C Mfg. Guns)
Features:
 No gunsmith installation. Simply install like factory plastic units.
 MIL-STD 1913 rails.
 Solid lock-up.
 T-marked for accessory location.
 Constructed of 6061 hard coat anodized for a lifetime of service.
 Grenade launcher or shotgun compatible with lower section removed.
 High quality at an affordable price.
|
_____________________________________________
MCTAR-18 (2 Piece Mid Length Rifle)
Features:
 No gunsmith installation. Simply install like factory plastic units.
 MIL-STD 1913 rails.
 Solid lock-up.
 T-marked for accessory location.
 Constructed of 6061 hard coat anodized for a lifetime of service.
 High quality at an affordable price.
$160.00
_____________________________________________
MCTAR-19 (2 Piece Full Length Rifle)
Features:
 No gunsmith installation. Simply install like factory plastic units.
 MIL-STD 1913 rails.
 Solid lock-up.
 T-marked for accessory location.
 Constructed of 6061 hard coat anodized for a lifetime of service.
 High quality at an affordable price.
$190.00
_____________________________________________

MCTAR-20
(2 Piece Free Float Carbine Length Forearm)
Features:
Weight: 11.0 oz.
 No removal of barrel or front sight for installation. Simply cut off the delta ring for a easy install.
 MIL-STD 1913 rails.
 T-marked for accessory location.
 Constructed of 6061 hard coat anodized for a lifetime of service.
 Uninterrupted or monolithic look upper rail.
 High quality at an affordable price.
$170.00 Each
_____________________________________________
MCTAR-20X (2 Piece Free Float Extended Carbine Length Forearm)
Features:
Weight: 14.0 oz.
 No removal of barrel or front sight for installation. Simply cut off the delta ring for a easy install.
 MIL-STD 1913 rails.
 T-marked for accessory location.
 Constructed of 6061 hard coat anodized for a lifetime of service.
 Uninterrupted or monolithic look upper rail.
 High quality at an affordable price.
  Retail $209.00 Each
_____________________________________________
MCTAR-22 (2 Piece Free Float Full Length Forearm)
Features:
Weight: 17.1 oz.
 No removal of barrel or front sight for installation. Simply cut off the delta ring for a easy install.
 MIL-STD 1913 rails.
 T-marked for accessory location.
 Constructed of 6061 hard coat anodized for a lifetime of service.
 Uninterrupted or monolithic look upper rail.
 High quality at an affordable price.
 $247.00 Each
_____________________________________________
MCTAR-23 (2 Piece Free Float Forearm Pistol Length)
Features:
Weight: 8.9 oz.
 No removal of barrel or front sight for installation. Simply cut off the delta ring for a easy install.
 MIL-STD 1913 rails.
 T-marked for accessory location.
 Constructed of 6061 hard coat anodized for a lifetime of service.
 Uninterrupted or monolithic look upper rail.
 High quality at an affordable price.
 $154.00 Each
_____________________________________________
MCTAR-24 (Two Piece Free Float 10" Carbine Length Forearm)
Features:
Weight: 14.7 oz.
 No removal of barrel or front sight for installation. Simply cut off the delta ring for a easy install.
 MIL-STD 1913 rails.
 T-marked for accessory location.
 Constructed of 6061 hard coat anodized for a lifetime of service.
 Uninterrupted or monolithic look upper rail.
 High quality at an affordable price.
 Requires the use of a low profile gas block, which should be installed by a qualified gunsmith.
 $214.00 Each
_____________________________________________
|
|