Daniel Defense, RB Precision is dedicated to providing Daniel Defense products at outstanding prices.
Quick index, click below to jump to section:
______________________________________________________________________________
Big hole uppers (.315) No Adaptor pins needed
PN: BHUPPER $220.00
______________________________________________________________________________
AR .223 Handguards
M4Rail 7.0
Includes Handguard, Barrel Nut, Threaded Ring, and Alignment Pins.
Weight 8.5 oz.
Designed to fit behind the standard carbine front sight post or any other gas block.
$299.00
---Need covers for your rails? Check out our Ergo/Falcon section
______________________________________________________________________________
M4Rail 9.5
Weight 11.1oz.
Designed to fit over a milled front upper.
$315.00
______________________________________________________________________________
9.5 FSP Free Float Handguard (Carbine) $310.00
The 9.5 FSP Free Float Handguard (Carbine) has the following specifications:
Length: 10.00 in. Width: 1.94 in.
Height: 2.45 in.
Weight: 10.20 ozs.
The Daniel Defense 9.5 FSP Free Float Rail System features a cut in the front of the top rail to accommodate the front sight post and gas block of a carbine length AR15 gas system, while at the same time, providing much needed additional rail space along the sides and bottom rails. More rail space means enhanced capability for modern rifle accessories. Indexing pins are constructed of stainless steel while all other components are 6061-T6 aluminum. The finish is Mil-Spec hard coat anodized black. Rails are 1913 Mil-Spec and are 100% checked for conformity. Every rail is available with either ladders or panels which are made from cantoprene, which can handle heat up to 350.
______________________________________________________________________________
M4Rail 12.0
Weight 13.1 oz.
Designed to fit behind the front sight post on rifles with long standard handguards or over a milled front sight in the short position.
$329.00
______________________________________________________________________________
M4Rail 9.5FSP
Weight 10.5 oz.
Designed to work with carbine standard front sight or flip up front sight.
$345.00
______________________________________________________________________________
M4Rail 12.0FSP
Designed to work with carbine standard front sight or flip up front sight.
$355.00
______________________________________________________________________________
AR10 Handguards
AR10 Carbine 7.0 handguard
$310.00
AR10 Lite Rail 7.0 (Carbine) Made for those super short .308 gas systems this rail will mount up on the DPMS carbine.
______________________________________________________________________________
AR10 Midlength 9.0 handguard
$360.00
The Daniel Defense AR10 9.0 Lite Rail features the innovative "Bolt Up System" that allows the handguard and the rifle to have an uninterrupted 'monolithic' upper rail. This feature is not only the basis for integrating with the upper receiver's picatinny rail; but it also the design element that allows the barrel to be free-floated for greater improved accuracy!
______________________________________________________________________________
AR10 Full length 12.0 handguard
$410.00
The Daniel Defense AR10 12.0 Lite Rail was designed to work with the AR10 or DPMS .308 rifle length gas systems; but works equally as well mounted over top of a low profile gas block. The rail and bolt up plate are machined from 6061-T6 aircraft grade hardened aluminum while the mounted bolts are constructed of Grade 8 steel for strength. The rail's unique "Bolt Up" mounting system mates with the upper receiver to create a singular 'monolithic' rail along the entire top portion of the rifle. The rail interface not only free-floats the rifle's barrel for improved accuracy, but also generates huge benefits when mounting optics and accessories.
The Daniel Defense AR10 12.0 Lite Rail was designed to work with the AR10 rifle length gas system. or cover a low profile gas block. Bolts are constructed of Grade 8 steel while the rail and the bolt up plate are machined from 6061-T6 aluminum. The finish is Mil-Spec hard coat anodized black. Rails are 1913 Mil-Spec and are 100% checked for conformity. Every rail come with your choice of ladders or panels which are made from santoprene, they can handle heat up to 350 degrees.
______________________________________________________________________________
BURNSED SLING LOOPS
A1 Burnsed Loop™
is designed and built for any AR15 using the A1 solid buttstock. Machined from aircraft grade aluminum and anodized black, it is easily attached with a screwdriver. Because it is sandwiched between the buttstock and the lower receiver, it adds .275 in to the length of the buttstock. A plastic spacer is provided which will properly transfer buffer recoil to the buttplate.
A stainless steel vented screw is provided to accommodate the added length and fits the A1. A stainless steel nut is also provided to replace the existing threaded sling loop at the rear of the buttstock.
$32.00 Specify Right or Ambi
______________________________________________________________________________
CAR Burnsed Loop™
is designed and built for any AR15 using a collapsible buttstock. Machined from tempered steel and phosphate finished black, it is installed by replacing the receiver cap which keeps the buttstock tube from rotating in the lower receiver. The loop section of this part is chamfered inside and out to remove any sharp edges. A stock wrench may be required to install this part. Please specify right hand or ambi when ordering.
$25.00
______________________________________________________________________________
Daniel Defense Simple Sling™ - Black
this sling is made from 1.25 in nylon webbing with a heavy duty Fastex buckle sewn to one end. It is strong, flexible, and simple to install and use.
$14.00
______________________________________________________________________________
A2 Burnsed Loop™
is designed and built for any AR15 using the A2 solid buttstock. Machined from aircraft grade aluminum and anodized black, it is easily attached with a screwdriver. Because it is sandwiched between the buttstock and the lower receiver, it adds .275 in to the length of the buttstock. A plastic spacer is provided which will properly transfer buffer recoil to the buttplate.
A stainless steel vented screw is provided to accommodate the added length and fits the A2. A stainless steel nut is also provided to replace the existing threaded sling loop at the rear of the buttstock.
$30.00
______________________________________________________________________________
Daniel Defense X-treme Sling™ - Black
this sling is made from 1.25 in nylon webbing with a heavy duty Fastex buckle sewn to one end. It is strong, flexible, and simple to install and use.
$32.00
______________________________________________________________________________
