Ergo - Falcon Industries
RB Precision carries the complete line of Falcon Industries ERGO product line, if you do not see it here please email or call.
ERGO GRIPS:
The Ergo Grip is the original ergonomically designed grip with smooth textured finger
grooves as shown. It has an integral rear upper extension that helps support the web of your hand.
It is comfortable, helps prevent fatigue, and aids in controlling the weapon even when wearing gloves.
The right and left hand models have a built in thumb shelf that helps maintain a consistent grip on
the weapon.
The textured finish provides a superior surface that minimizes slippage. The Rigid Polymer and
the SureGrip overmolded rubber versions are both virtually impervious to oils and solvents used
on firearms.
AR Kit - Rhino Grip™ $19.00
THIS IS THE RIGID POLYMER RIGHT HAND MODELS
Black #4010XBK
Green #4010XOD
THIS IS THE RIGID POLYMER AMBI MODELS (Our Most Popular Seller!)
Black #4015XBK
Green #4015XOD
ERGO Grip™ AR Kit - Sure Grip™$25.00
THIS IS THE RUBBER OVERMOLDED RIGHT HAND MODELS
Black #4000SGBK
Green #4000SGOD
THIS IS THE RUBBER OVERMOLDED AMBI MODELS (Our Most Popular Seller!)
Black #4005SGBK
Green #4005SGOD
Coyote Brown #4005SGCB
____________________________________________________________
Ergo Grip™ Tactical for AR15/M16 Rifles
These tactical grips come in a Tactical Standard Model which is an ambidextrious
grip. The Tactical Deluxe Model is a heavier grip with a thumb rest on the left side
and a web support rear extension for better control of the weapon. Both models
come in the standard black color and are available in either a Rigid Rhino Hide™ or
a soft rubbery Sure Grip™ textured finish. Both models are avialable with or without
a palm rest.
Tactical Deluxe Model with Palm Rest
Rhino Hide™ #4050 - $59.00
Texture: Sure Grip™ #4055 - $59.00
____________________________________________________________
A-2 Sto Grip
The Sto Grip is a standard A-2 grip with a trap door for stowing batteries, spare parts
or cleaning gear. Opening door is accomplished by pushing a 5.56 cartridge point into
catch hole in the rear of the grip.
A-2 Sto Grip # 4095
$12.00
____________________________________________________________
Ergo Gapper™ for AR15/M16 Rifles
United States Patent No. 6,434,874
The Ergo Gapper™ is a small unique part designed to fill the small void in front of the pistol
grip up to the rear of the trigger guard. The Gapper™ is made from a solvent resistant
thermoplastic elastomer, remains flexible and cushions your knuckle when holding the grip.
It also helps prevent debris from being lodged into the open space and provides a more finished
look to the rifle.
Simple Installation Instructions for the Ergo Gapper™
Slide the "U" shaped portion of the Gapper™ over the rear of the trigger guard with the longer side
pointing down and push it forward. If it can not be pressed in easily, try moistening it, or as a last
resort loosen the grip by untightening the grip mounting screw. After the Gapper™ is positioned all
the way forward retighten the mounting screw.
Ergo Gapper™ #4085 $2.50
____________________________________________________________
Ergo Grip™ Plug for Ergo Grip™AR
The Ergo Grip™ Plug is designed to cover the hole on the bottom of an AR series
Ergo-Grip™. It is a press fit plug held in place by friction. The plug once installed,
prevents debris from being lodged in the cavity of the grip. The plug also functions
as a shock absorbing pad and helps protect the grip from damage when setting the
rifle down on a hard surface. It also provides a more finished look to the rifle.
Installation Instructions for the Ergo Grip™ Plug
Note: This plug will only fit the Ergo Grip™ AR series Grips
Examine the plug and note the dot by the hole in the plug. The dot indicates the forward end of the
plug. Install the forward end of the plug at an angle all the way into the cavity of the grip so that both
flanges at the forwrd end are in the cavity and both flanges at the rear are not in the cavity. Hold
the forward end in the cavity and push on the rear end of the plug until the plug snaps in place.
Install the plug at an angle. Don't attempt to push it straight in.
ERGO Grip™ $4.00
Black #4335 BK
Green #4335 OD
____________________________________________________________
Full Cover Rail Covers
The patented full cover rail covers clip directly onto Picatinny rail configurations.
They form a full cover handguard and rail protector. They are available in 3 sizes.
The small size covers 5 slots with three covers required per M-4 rail section.
The medium size covers 10 slots. The long size covers 15 slots and one cover is
required per M-4 rail section. The available colors include black, coyote brown, Dark Earth
and o.d. green.
Short (covers 5 slots) 4360BK (black)
Price $3.00 Each
Medium (covers 10 slots) 4361BK (black)
Price $7.00 Each
Long (covers 15 slots)4362BK (black)
Price $11.00 Each
____________________________________________________________
$12.00 Each Long only
____________________________________________________________
$12.00
____________________________________________________________
Rail Hand Stops
Price $2.00 pack of 2
4363
____________________________________________________________
Low Profile Rail Covers
These patented covers can be used to form a very low profile grip. They protect
the unmounted rail areas from damage. Most rail systems represent a
substantial investment. Preventing the rail from being damaged protects that
investment. Most rail systems are machined and the edges are sharp.
These covers actually protect the operator from being cut by the rail. The sharp
rail edges can also act like a saw when they aren't covered. Covering the rails
can prevent damage to gear that may be abraided or cut by uncovered rail sections
such as repelling ropes and clothing. These low profile rail covers are made from
santoprene and provide a rubbery grip surface. They are easily shortened by cutting
to length. The available colors include black, coyote brown, Dark Earth and o.d. green.
These covers come in two sizes covering 5 slots
or 18 slots.
RBP tech tip! Want the best buy? Buy a 18 slot and cut to length its cheaper!
Short (covers 5 slots)
4370BK (black)
4370 OD (green)
Price $3.00 Each
Long (covers 18 slots)
4373BK (black)
4373 OD (green)
Price $11.00 Each
____________________________________________________________
Ergo™ Rail Mount
(Only available in Ambidextrous)
#4250
$60.00
Black #4250BK
Color: Olive #4250OD
Color: Coyote Brown #4250CB
This is a Standard Ambidextrous ERGO Grip™ that can be quickly detached
from rail. The grip is attached to a hard anodized base and fits standard
Picatinny rail configurations and most Weaver base configurations. It attaches
with standard Carry Handle Nut/Clamp bar arrangement. The grip drops straight
off and does not require removal of other rail mounted accessories. It is a very
sturdy design.
____________________________________________________________
Broomhandle Grips - Price $70.00 Each (YOU MUST SPECIFY COLOR)
#4255
(Straight Broomhandle)
#4256
(Angled Broomhandle)
____________________________________________________________
$37.00
____________________________________________________________
$35.00 4251BK
____________________________________________________________
$50.00 4261
____________________________________________________________
$50.00 4262
____________________________________________________________
$20.00 4393
____________________________________________________________
$15.00 4395
____________________________________________________________
WE CARRY THE FULL LINE OF ERGO PRODUCTS
CALL WITH YOUR SPECIAL REQUESTS!
Ergo has grips for the HK91, AK47, 1911 and more!
