ARMS

RB Precision is dedicated to providing competitively priced ARMS products and superior customer service!

ARMS #1 $225.00

G-3/MP5 mount Short(Shorty)

Designed to fit the HK-91-93-94,MP5 and SP89. The A.R.M.S. G-3 locks solidly to the upper receiver of the rail while allowing use of the iron sights. The mounting platform provides the A.R.M.S. Universal rail to accept both STANAG and dovetail fastenings, for both day optics, night vision and lasers, as required. STANAG rings and rails can also be utilized. The A.R.M.S. G-3 is manufactured from 4140 steel and phosphate finished black to spec DOD-16232

ARMS #1 $215.00

G-3/MP5 mount Standard length

ARMS #1-SH-RAIL $40.00

Optional special 6" rail

ARMS #1-01-TRIJ-REFL $60.00

Optional Trijicon interface

__________________________________________________________________________

ARMS #2 $59.00

The finest scope mount designed for the M16 rifle. Features the A.R.M.S./SWAN ® Universal mounting platform, accepts NATO STANAG and Weaver type scopes, wide angle TV shaped iron sight see-thru, unique self-locking thumbnuts, fits snug in carry handle for continuous zero hold.

ARMS #2 EXTENDED $64.00 (6.5" long)

__________________________________________________________________________

ARMS #3 $130.00

The A.R.M.S. FN FAL standard and paratrooper are precision machined to military specifications. This mount replaces the existing dust cover and offers the user a rigid mounting base with NATO standard weaver rail and Picatinny rails. This mount with fit L1A1 and FAL rifles. Manufactured from aluminum extrusions with steel attachment rails riveted in place. The exceptional rigid alloy body provides a rock solid platform for even the largest optics.

__________________________________________________________________________

ARMS #4 $143.00

__________________________________________________________________________

ARMS #5 $59.00

One of the most versatile mounts on the market. Made of extruded aluminum with a Mil-spec black hardcoat. Quick detachable, multiple eye relief, spring loaded clamping bar, iron sight see-thru. NATO STANAG and Weaver rail fastening, self-locking captivated thumbnuts. Attaches to Weaver type rail and flattop receivers.

__________________________________________________________________________

ARMS #6 $48.00

A.R.M.S.® #6 II Adaptor converts NATO STANAG mounts to A.R.M.S./SWAN(aka Mil-Std. 1913 rails. Mil-spec hard coat finish. For additional eye relief considerations, the rail provides two positions of fastening, via two securing screws (included), which allows the rail to extend to the rear or front.

__________________________________________________________________________

ARMS #7$48.00

Converts NATO STANAG Scopes to Weaver type rail. Quick detachable, spring loaded clamping bar, self locking captivated thumbnuts, multiple eye relief.

__________________________________________________________________________

ARMS #10 $64.00

A.R.M.S.® Item #10 ACOG Mt

Multi-position channel mount with self-locking thumbnuts. The #10 mt. is extremely rugged and versatile. The finish is mil-spec black hardcoat, and provides the eye relief options needed for many weapons.

__________________________________________________________________________

ARMS #12 $130.00

ARMS item #12 CQ/T Mount Engineered to provide the optimum combination of the A.R.M.S.® repeat Q.D. Throw Levers with the New Leupold Multi-Fastened CQ/T Optic. The fast action of the optic is enhanced by the quick on/off of the Mil-Spec throw levers and provides a rugged no nonsense system of the future.

__________________________________________________________________________

A.R.M.S.® Item #15 ACOG Mt $117.00

A.R.M.S. has succeeded in developing an ultra low profile mounting platform for the Trijicon ® reflex sight. The combination of the A.R.M.S.® repeat zero and patented throw lever system and the reflex sight provide the shooter with built in streamline appearance, function and superb fast action accuracy. The #15 platform is attached to the bottom of the sight by 3 screws that are supplied with the platform, and provides 2 positive locking throw levers with A.R.M.S.® patented no-mar buffer pads, no gunsmithing required. The #15 Reflex mount platform meets or exceeds all mil-spec requirements just like all other A.R.M.S.® standard mil-spec products.

Spacer available. $12.00

__________________________________________________________________________

A.R.M.S. #16A AIMPOINT M16A1A2 CARRY HANDLE MOUNT $70.00

AR15/M16 Carry Handle Mount for Aimpoint Comp. Optic - The #16A allows for the mounting of the Aimpoint M2/ML2 & other Comp. sights to be mounted directly to the carry handle of the AR-15/M16/M16A1/M16A2/M4. 30mm ring mount. The see through design allows for use of iron sights with the mount in place

__________________________________________________________________________

A.R.M.S. #16T TRIJICON TRI-POWER M16A1A2 CARRY HANDLE MT $70.00

AR15/M16 Carry Handle Mount for Trijicon TriPower Optic - The #16T allows for the mounting of the Trijicon Tri Power to be mounted directly to the carry handle of the AR-15/M16/M16A1/M16A2/M4. The see through design allows for use of iron sights with the mount in place.

__________________________________________________________________________

A.R.M.S.® Item #17 $75

The Single Lever Tri-Lock mount was Developed by A.R.M.S. for small pocket scopes and laser attachments for super compactness. Two (2) solid attachment feet on the right side are firmly held in place with the A.R.M.S.® steel locking foot and lever on the left side. Standard STANAG width channel, allows secure laser or N.V. optic attach-attachment at two points. Repeat Zero Hold with easy on and off.

__________________________________________________________________________

A.R.M.S. 17 NEW SHORTIE $75.00

Single Lever Tri-Loc Mount - 4140 Steel Construction - Universal mounting platform. Length 1 9/16"

__________________________________________________________________________

A.R.M.S.® Item #18 $170

Since its introduction to the marketplace in 1989, this foundation has maintained its reputation as being the best mounting systems for the M21/14 Rifle. The A.R.M.S.® #18 offers interchangeability of Day & Night Vision, with an ultra low profile and the A.R.M.S., SWAN ® aka Mil-Std. 1913 Rail. Made of 8620 case hardened steel. Precision fit to the base integral with the receiver. Two attaching points plus a third contact point for ultimate stability.

__________________________________________________________________________

A.R.M.S.® Item #19 $150

Aluminum base secured by steel feet & levers with A.R.M.S.® no-mar patented Buffer Pads. Interfaces to M16A1A2, M4 ,also Stinger & AT-4 when M16 mt. Is used in the At-4 & Stinger Brackets. Provides universal platform, which is the NATO STANAG and Weaver standards combined for many day and Night Vision optics & lasers. Guaranteed Repeat Zero Hold.

__________________________________________________________________________

A.R.M.S.® Item #19ACOG $150.00

The A.R.M.S.® #19acog Throw Lever Mount for ACOG® scopes features most of the design of the #19A, with the addition of the ACOG® channel. This mount provides the ACOG® scope three positions of added relief to select from. The aluminum base is secured by A.R.M.S.® steel locking feet and levers and the no-mar patented buffer pads. Fits all Mil-Std Dovetail A.R.M.S.® Rails.

__________________________________________________________________________

A.R.M.S.® Item #19S $115.00

Acog Mount - The A.R.M.S.® #19S Acog Single Throw Lever Mount for the Trijicon ACOG® scopes is similar in design to the #19 Acog, but shorter. This mount provides the ACOG® scope with two positions of added relief to select from. The aluminum base is secured by A.R.M.S.® steel locking feet and lever and the no-mar patented buffer pad. Fits all Mil-Std Dovetail A.R.M.S.® Rails.

__________________________________________________________________________

A.R.M.S.® Item #20 $150

NSN 5855-01-300-7424. Designed much like the A.R.M.S.® #19A, without the STANAG or male Weaver capability on the top surface. The top surface is machined to fit the AN/PVS-4 N.V. Scopes. Top surface can be tailored machined to fit other optic bottom surfaces. Fits all Mil-spec. dovetail A.R.M.S.® Rails.

__________________________________________________________________________

A.R.M.S.® Item #21 $75

The #21 Rings are all steel with a Mil-spec phosphate finish for ultimate surface protection. Phosphate finish screws and wrench included. Available in Low height (Sold as a Pair).

__________________________________________________________________________

A.R.M.S.® Item #22 $115

All Steel 30mm Ring, secured with A.R.M.S.® dovetail system to an extruded aluminum platform. Build in no mar Patented Buffer Pads. Available in Low, Medium, and High heights.

__________________________________________________________________________

A.R.M.S.® Item #22TRC $35

Tactical Ring Cap - (Shown mounted on #22 Ring) - Use this replacement ring top to mount a Tactical Ring Rail or Tactical Ring Sight. Throw Lever ring base and screws are not included with #22TRC.

__________________________________________________________________________

A.R.M.S.® Item #22TX30 $99

Trijicon TriPower Throw Lever Ring Mount - Designed exclusively for the Trijicon TriPower. The unique ring saddle allows for optimum surface contact for the most secure fit. Ultra rugged and low mounting that can also be modularly raised via optional spacer platforms. The spacers can be added at a modest cost. Secured to an A.R.M.S. #17 Platform with the A.R.M.S. patented Throw Lever system guarantees easy on and off repeat zero. Built in no mar patented buffer pad. 22TX30 Spacers also available for added height.

__________________________________________________________________________

A.R.M.S.® Item #22TRR $20

Tactical Ring Rail (shown on #22 Ring with Ring Cap) - Use the Tactical Ring Rail to mount lights, lasers or whatever on top of your rifle scope. Must be used in combination with the Tactical Ring Cap.

__________________________________________________________________________

A.R.M.S.® Item #22TRS $24

Tactical Ring Sight - (Shown mounted on #22 ring with ring cap) - Use the Tactical Ring Sight as a back-up iron sight incase your optic fails. Great for close range quick shots thru the "V Groove". Must be used in combination with the Tactical Ring Cap.

__________________________________________________________________________

A.R.M.S.® Item #22M68 $109.00

ARMS #22M68 Aimpoint M2/ML2 Ring Throw Lever Mount:

__________________________________________________________________________

A.R.M.S.® Item #22M68 SPACERS FULL OR 1/2 $8.00

ARMS #22M68 Spacer for Comp. Ring Mount

__________________________________________________________________________

A.R.M.S. CANTILEVER SPACER $28.00

22M68 Extension - The 22M68 Extension (cantilever) mounts to the #22M68 mount and extends forward 1 3/4" out past the standard 22M68 mount. Overall length of 22M68 Extension is 4 1/8", while the height is 1/2".

__________________________________________________________________________

A.R.M.S.® Item #23 $83.00

A.R.M.S.® Quick Detach Throw Lever Pistol Grip. U.S. Pat No. 5,276,988 & No. 4,845,871

__________________________________________________________________________

A.R.M.S.® Item #32 $95

Throw Lever Adapter for Harris Bipod - This item is designed to mount to a Harris bipod and adapts the bipod to the well known and proven A.R.M.S. Throw Lever System.

__________________________________________________________________________

A.R.M.S.® Item #35QD $85.50

Item #35 QD Throw Lever Mount

For those who already use the A.R.M.S.® #35 Q.D. Track Mounting Rings with the A.R.M.S.® #36 OSR and #39 A2 Plus Mount, we now provide the first Modular Track Mounting Throw Lever Rail System in the market place. This magnificent system will allow the soldier or sportsman to accommodate virtually any 30mm optic and in perfect track alignment from Ultra Low to Extra High rings for those very large objective lenses.

______________________________________________________________________

A.R.M.S. #35 RINGS /ULTRA LOW 30MM TRACK MOUNT SCOPE RINGS $58.00

Track Mount Rings - All Steel 30mm Ring, Supplied with mounting screws. Designed to be mounted onto such mounts as the #35QD, #36 OSR, #38, #39 A2 Plus mount, and others.

Available in medium and high $65.00

______________________________________________________________________

A.R.M.S.® Item #36 (OSR-Ex $75.00, OSR-S-Ex $89.00)

Designed for those who want optimum optic accuracy without the need of combat built-in iron sights, but need the other capabilities as found on the #38 S-Ex/ Ex Military SWAN® Sleeve. Raise and lengthen your flat top receiver while totally protecting the rifle dovetails. Allows super low mounting for bench rest shooting that extends the standard receiver to handle all length optics. U.S. Pat No 5,142,806

__________________________________________________________________________

A.R.M.S.® Item #37

The #37 Ring inserts are all steel with a Mil-spec phosphate finish, for ultimate surface protection. Converts all A.R.M.S.® and other 30mm rings to 1". (Sold as a pair) $35.00

__________________________________________________________________________

A.R.M.S.® Item #38 (Std - $150 (same as A4 length), Ext - $165 (2" over A4 length), S-Ex - $180)

The SWAN® Sleeve provides a platform that is semi-permanent to the M16 and other similar weapons. When installed to the A.R.M.S.® designed M16 A3 flat top receiver, the Sleeve height provides a patented flip up rear sight The rear sight provides an A2 type windage adjustment with a std. 250-500m range zero, via the front sight bead. The SWAN® Sleeve protects the flat top receiver, providing dovetail protection bumpers along the entire length. The Sleeve is available in three lengths. The spring loaded rear sight is cleverly designed to repeat zero each time it is released by the easy to activate positive hold release lever, even with arctic mittens.

__________________________________________________________________________

A.R.M.S.® Item #39 ( #39 135.00, #39-SR 3rd Rail $94.00 )

Developed by A.R.M.S., Inc. under contract for the U.S. Army/ARMS Laser Combat I.D. (CID) Program. It upgrades A1- A2 M16 weapons to new capabilities that match those of the patented SWAN® #38 Sleeve; for enhancement of the Army's Red Dot Optic/Laser requirements.

The main body of the A.R.M.S.® A2 Plus mount locks into both the carry handle channel and the handle front support, utilizing two A.R.M.S.® self-locking thumbnuts. This capability provides rigid support of the dovetail platform that is extended over the hand-guards; just like the patented SWAN® Super Extended Sleeve. The A.R.M.S.® A2 Plus now comes with the A.R.M.S./SWAN®/ aka Mil-Std.1913 rail machined to mate the top of the carry handle, much like the famous A.R.M.S.® #2 M16A1A2 Scope Mount. Provides dual mounting capabilities while maintaining the enhanced iron and optic see thru function. The bi-level mounting capability offers multiple combinations of attachments, no tools required. The #39 also features a brush breaker at the front to prevent branches and other objects from wedging between the hand-guards and the suspended rail. Optical and laser perfect parallel alignment are achieved, while eliminating heat and vibrations that may be experienced in barrel mounting systems. An optional third rail attachment that secures to the left hand side of the #39 provides two dovetail locking blocks, just as the #38 Sleeve for additional mounting. U.S. & Foreign Patents Pending. This does not work on a detachable carry handle.

_________________________________________________________________________

ARMS #40 Flip up rear sight: (this is available as a 40A with a standard A2 aperture) $106.00

The A.R.M.S.® Stand Alone Flip-up sight, utilizes the same well proven concept as the rear sight on the SWAN® Sleeve system. The unique design of the spring loaded rear sight, ensures constant battery action and repeat zero. The sight is held in the locked down position by a quick release lever, that prevents the sight from being accidentally engaged, but is as fast as a trigger to release even with arctic mittens. The initial elevation zero utilizes the standard M16/M4 front sight bead. When the sight is released into battery the 250-300 meter aperture is ready for immediate close combat use. For longer ranges the leaf sight aperture is rotated to access the 500-600 capability with the built in horizon line feature that helps lead distant targets and lets the shooter square the rifle to counter windage offsets, if the rifle is inadvertently tilted. Other type rear iron fold-down sights require the shooter to push it into position, which means they can be accidentally knocked down at the worst time. The A.R.M.S. spring loaded flip-up sights never let you down, because they're designed to always be there even when going thru brush or being dropped. U.S. Patents No.5,533,292 & No. 5,142.806

#40 has an aperture with notch for 600 yard distance.

__________________________________________________________________________

#40A With standard aperture $106.00

__________________________________________________________________________

A.R.M.S. #40L STAND ALONE FLIP UP REAR SIGHT (LOW) $116.00

__________________________________________________________________________

A.R.M.S. #40LSP (SAME PLANE) STAND ALONE FLIP UP REAR SIGHT (LOW) $116.00

Rear flip up sight with same plane aperture system.

The #40L SP is identical to the #40L but it utilizes our same plane aperture system. This aperture set allows the operator to choose between large and small apertures without worrying about them being zeroed to different ranges.

The Small aperture can also be removed if the user desires the larger CQB aperture only.

__________________________________________________________________________

A.R.M.S. #50C S.I.R. SYSTEM BILEVEL COMMERCIAL $369.00

The S.I.R.(TM) System is designed to fit mil-spec flat top receivers from Colt, Armalite and Bushmaster in the 5.56 carbine lengths. There may be other flat top receivers manufactured that the S.I.R. may fit to properly, but we do not guarantee or warrantee S.I.R.(TM) on any flat top receivers other than those listed above.

This modular receiver sleeving system is a hand guard universal mounting system that leaves the barrel totally free-floating while providing a rigid ultra-light platform on which to mount virtually any mission specific accessory like thermal imager, lasers, night vision, optical sight, M203, etc.

__________________________________________________________________________

ARMS #50SL BI-LEVEL S.I.R. System : $369.00

same as above SlimLine

__________________________________________________________________________

ARMS #51-A2-SIR System : $369.00

__________________________________________________________________________

A.R.M.S. #58M S.I.R. SYSTEM MID-LENGTH $399.00

The S.I.R.(TM) System is designed to fit mil-spec flat top receivers from Colt, Armalite and Bushmaster in the 5.56 carbine MIDLENGTH . There may be other flat top receivers manufactured that the S.I.R. may fit to properly, but we do not guarantee or warrantee S.I.R.(TM) on any flat top receivers other than those listed above.